Product code: N/A
Tangum Rubber Sheet / Abrasive Rubber Sheet / Shot-blasting Rubber Sheet
$1,450.00
65 shore A red color SBR rubber sheet is a blend of natural rubber and styrene butadiene rubber (SBR), it is able to endure physically abrasive conditions, this red color SBR rubber sheet material is overall harder and denser thanks to the SBR used in it. This is also a waterproof rubber sheet as it can be used in applications involving hot and cold water. However, 65 shore A red color SBR rubber sheet is not recommended for applications that may involve excessive oils or outdoor weather conditions. It is mostly meant to physical industrial applications. The main attraction of these hard rubber sheets is their red color. Some consumers take aesthetic value into consideration for their projects, and we aim to offer rubber roll material that is excellent both in a functional sense as well as an aesthetic sense. Keep in mind this 65 shore A red color SBR rubber shee does have slight color variations from roll to roll.
Description
Characteristics
No Reviews
Description
Application of Red SBR Rubber Sheet:
- 65 shore A red color SBR rubber sheets are used as skit board sheets, bride bearing pads, shot plasting sheets, high tensile tangum sheets, commercial sheet with or without cotton or nylon insertion etc. 65 shore A red color SBR rubber sheet also has excellent oil resistance, and good resistance to acids, alkalis and salts. SBR rubber is not recommended for use in area where it could come in contact with oils and hydrocarbons. And red color SBR rubber sheet is a general-purpose gasket material for air, hot and cold water, saturated steam and exterior service.
Characteristics
Weight | 4.6 kg |
---|---|
Dimensions | 110 × 110 × 150 cm |
Size | (1mtr*2mtrsheet): |
PRICE RANGES FROM : | 350/- P.KG – 950/- P.KG |
Hardness(Shore A) | 40H(38-42), 50H(48-52), 60H(58-62), 70H(68-72), 80H(78-82) |
Appearance | Transparent |
Tensile(Mpa) | 9.5, 9 |
Elongation At Break | 400%, 500%, 600%, 700%, 800% |
Tear Strength (Die-c)(Kn/m) | 26, 35, 40 |
Rebound | 45%, 52%, 55% |
Reinforcement | Fiber mesh (Width up-to 1.5 mtr)Application as conveys belts etc., |
Compression set 22 hrs @ 175°C | 15, 16, 17, 18, 19 |
Working temperature range: | -40 to 250°C |
Vulcanization conditions: | 10 min. @ 170 ° C |
Post cured: | 2h @ 200 ° C in hot air |